江西高速收费岛钢模具 水泥安全岛模具使用须知 建信厂家定制

江西高速收费岛钢模具 水泥安全岛模具使用须知-建信厂家定制

安全岛模具跟大多数模具相同的是它也是钢模具，所以钢模具在使用时需要注意避免

磕碰、磨损、沾水等现象，只要多加的注意就能避免造成很多损失，还能够使用很长

的时间，安全岛模具使用的是厚度3mm的钢板制作而成，不会建议模具过薄或者过厚

The safety island mold is the same as most molds in that it is also a 

steel mold, so when using the steel mold, attention should be paid to 

avoid collision, wear and staining

Water and other phenomena, as long as 

more attention can avoid causing a lot of losses, and can be used for a 

long time. The safety island mold is thick

It is made of 3mm steel plate. 

It is not recommended that the die is too thin or too thick.

江西高速收费岛钢模具 水泥安全岛模具使用须知-厂家定制

因为安全岛模具过薄使用寿命短，过厚生产成本高不易搬运，所以选择合适的模具厚

度至关重要，还有就是模具在搬运、使用、存放时都是拆开的状态，所以不要让钢板

之间产生摩擦，造成不必要的损失，一旦发现模具出现了生锈、磕碰等现象及时的联

系模具制作工厂进行补救措施，早发现早及时止损避免造成更大的损失，耽误了工期

进度，每天需要观察至少一次模具的情况，做到心中有数，在使用完毕之后一定要及

时的对模具进行清洗，如果不小心粘连上混凝土就要使用稀释后的草酸对模具进行清

洗，这样虽然会对模具产生一定的伤害，但是比起清洗不下去造成的第二次无法使用

相对来说还是轻的，所以一定要及时清洗及时处理。

Because the safety island die is too thin, short service life, too thick, 

high production cost and difficult to handle, it is very important to 

select the appropriate die thickness

Yes, the mold is disassembled during 

handling, use and storage, so don't let the friction between the steel 

plates cause unnecessary damage

once it is found that the mold has rust, 

collision and other phenomena, contact the mold manufacturing factory for 

remedial measures in time, and stop it in time

In order to avoid causing 

greater losses and delaying the construction progress, it is necessary to 

observe the condition of the mold at least once a day, so as to know well 

and make

After use, the mold must be cleaned in time. If the concrete is 

accidentally adhered, the diluted oxalic acid must be used to clean the 

mold

Cleaning, although it will cause some damage to the mold, it is 

relatively more difficult to use the second time because it can not be 

cleaned

It is light, so it must be cleaned and handled in time.