道路防撞墙钢模具的性能及养护介绍和说明-建信模具

模具介绍：

道路防撞墙模具介绍主要是用来生产我们的公路两边用来保护我们整个道路的防撞墙的生产工具，一般采用的是两块钢板通过对拉螺栓进行固定的生产方式。使用对拉螺栓的制作费用还比价低。对拉螺栓自成一套零件，存放时可以安装好一起进行存放，不容易丢失。MOULD DEscriptION: Road Crash Wall mould description is mainly used to produce our road on both sides of the crash wall used to protect our entire road production tools, it’s usually made of two steel plates held together by mode of production bolts. The production cost of using pull bolts is lower than the price. The pull bolt is a set of parts, when stored can be installed together for storage, not easy to lose.

模具性能：

道路防撞墙钢模具加工制作比较简单，并且组装起来比较简便，拆模比较容易，不会损坏钢模板，还能有效的延长道路防撞墙模具的使用寿命，让混凝土构件的整体形状更为美观。使用道路防撞墙模具进行生产之后，我们需要通过自然养护的生产方式来对混凝土制块进行养护。

Mould performance: The manufacture of the Steel Mould for the road anti-collision wall is relatively simple, and the assembly is relatively simple, the demoulding is relatively easy, the steel mould will not be damaged, and the service life of the mould for the road anti-collision wall can be effectively extended, to make the overall shape of the concrete members more beautiful. After using road crash wall molds, we need to use natural curing mode of production to maintain the concrete blocks

使用说明：

道路防撞墙模具一般在工程中对生产出来的混凝土制块的浇水养护工程的时间不能低于一周，浇水的次数应该是贯穿整个混凝土的养护期的，混凝土的表面应该一直处于湿润状态。气候比较干燥的情况下，可以适当的加大加水次数。如果施工现场不能够进行浇水的话，我们建议施工方在使用该模具来进行生产工作的时候，完成混凝土浆料的浇筑工作之后，还需要注意其整体的质量，从而其整体的生产情况。

Directions: In general, the time of pouring and curing the produced concrete blocks can not be less than one week, and the Times of pouring should be throughout the curing period of the concrete, the surface of the concrete should always be wet. The climate is drier case, can increase appropriately add water frequency. If the construction site can not be used for watering, we suggest that the construction side in the use of the mold to carry out the production work, after the completion of concrete slurry pouring work, but also need to pay attention to its overall quality, so that the overall production situation.