防撞墙钢模具，水泥防撞墙模具使用方式及操作步骤介绍-建信模具

　防撞墙模具  水泥防撞墙模具 其实在各地的高速公路以及普通公路的修建都有着供应使用，对于

这款模具而言，其实更为重要的便是怎样去进行操作，并且如何保证模具生产后的成品质量。防撞墙

模具 水泥防撞墙模具多为钢材料制作成型，这种模具与防撞墙模具 水泥防撞墙模具的形状是类似的

，在使用的时候却需要通过现浇的工艺进行模具的使用，在加工之前要确定好这几块模具是可以进行

拼接的，例如模具的底板以及侧板是配套的，要求整体不能够出现过于明显的磨损或者是生产的问题

，只有这样才能够保证模具可以正常的加工。

The anti-collision wall mold, the cement anti-collision wall mold, actually in each place 

highway as well as the ordinary highway construction has the supply use, regarding this 

mold, actually more importantly is how carries on the operation, and how to ensure the 

quality of finished products after mould production. Anti-collision wall mold, cement 

anti-collision wall mold is mostly made of steel. This mold is similar to the shape of 

anti-collision wall mold, cement anti-collision wall mold, but when used, the mold needs 

to be used through the cast-in-place process, before processing to make sure that these 

pieces of die can be spliced, such as the mold bottom plate and the side plate is a 

complete set, require that the whole can not appear too obvious wear or production 

problems, only in this way can guarantee the mold can be normal processing.

在使用防撞墙模具 水泥防撞墙模具时要求工人将模具清理干净，这款模具其实与隔离墩的差距并不是

非常大，尺寸以及形状方面都要非常相似，制作出来的成品作用也是相同的。在现浇的时候要求将模

具提前清理干净，拼接时确定好加工的位置，直接将模具进行固定，如果担心出现漏浆的情况，可以

在外面增加一层抗压装置，内腔中刷油后放入泥浆的管道，通过管道开始泥浆的浇筑，进行排气处理

后就可以等待泥浆的凝固了。

In the use of anti-collision wall mold, cement anti-collision wall mold requires workers 

to clean up the mold, this mold and the gap between the pier is not very large, size and 

shape are very similar, the finished product does the same thing. When pouring, the mould 

should be cleaned up in advance, the machining position should be determined when 

splicing, and the mould should be fixed directly. If slurry leakage is feared, a layer of 

anti-pressure device can be added outside, in the cavity after the oil brush into the mud 

pipe, through the pipe began pouring mud, exhaust treatment can wait for the 

solidification of the mud.

 防撞墙模具 水泥防撞墙模具的使用方式是应该一定的操作步骤的，因为不按照生产方式生产的产品

的质量是没有什么保证的，很可能出现损坏，并且因为是需要保护车辆行驶人员的安全的，而一旦出

现了质量问题，对于车辆行驶人员以及道路两侧的行人都是比较危险的，接下来就简单的介绍一下这

样的防撞墙模具 水泥防撞墙模具如何使用。首先，需要对其进行检查，主要检查表面是否光滑平整，

这样可以制作出合格的产品，表面的坚实程度以及美观性都是很有保证的

There should be a certain operating procedure for the use of the anti-collision wall 

mould and the cement anti-collision wall mould, because there is no guarantee of the 

quality of the products produced in accordance with the mode of production, and damage is 

likely to occur, and because it is necessary to protect the safety of vehicle drivers, 

and once there is a quality problem, it is more dangerous for vehicle drivers and 

pedestrians on both sides of the road, the following is a brief introduction to such a 

collision wall mold, cement collision wall mold how to use. First of all, it is necessary 

to check, mainly check whether the surface is smooth and smooth, so that you can make a 

qualified product, surface firmness and aesthetic is very guaranteed